48V 60V 72V 2600W-4000W 80A Ebike Programmable Intelligent Control System: 80A Controller+Display+Brake+Throttle+PAS+Alarm+Bluetooth

48V 60V 72V 2600W-4000W 80A Ebike Programmable Intelligent ControlSystem Kits: 80A Sine Wave Controller+Colorful Display+Hydraulic Disc Brake+Throttle+PAS+Alarm+Bluetooth

Package Includes:
1. 24 MOSFET 80A 48V, 60V, 72V Universal Voltage 2600W-4000W Intelligent Programmable Controller
2. 48V, 60V, 72V Full color TFT RSM-750C Display (with 5-level PAS, Speed Limit, Speed Display, Voltage Selection, Start Mode, Regenerative Braking Function)
3. Risunmotor RM-D700 Hydraulic Disc Brakes, cut off power
4. Twist Throttle
5. Pedelec Assistant Sensor/8 Magnetic PAS Drive
6. Alarm System|Remote start + Alarm + Motor Lock+Bluetooth module

Carton Size: 43*21*21cm
Gross Weight: 4.4KG (with carton)

Attention:Your Battery BMS should support max continuous 80A discharge current.

Controller Advantage:
1.Programmable Sine Wave Controller which support big current and smart match with each motor through self-learning, works with high efficiency, less noise, and lower energy consumption, which makes your electric vehicles or electric motorcycles more comfortable and easier to control, give you best pedal experience
2.Motor torque ripple is reduced to minimum through FOC, more smooth and comfortable
3.Universal Input Voltage Range: 48V/60V/72V
4.Work with or without display
5.Parameter setting via Mobile Phone App or Computer
6.All protection make it long life and safe: over/under voltage, over current, over load, over heating, anti-runaway, locked-motor protection
7.Multi functions: Smart match with different motor, 5-speed level for throttle and PAS, Speed limit, reverse, anti-thief, Regenerative Braking, Electric Braking, Keyless start and etc.
8.Best heat sinking with thicker Heat sink Aluminium Plate
9.Anodized Aluminium Controller Case against scratch

Controller Technical Data:
General Specification:
1. Power supply: 48V/60V/72V, MAX DC current: 80A, Max phase current: 250A
2. Rated Power: 48V 2600W/ 60V 3300W/ 72V 4000W
3. Peak Power: 48V 3800W/ 60V 4800W/ 72V 5700W
4. Low Voltage Protection: 40V/50V/60V
5. Brake: Low Voltage Brake
6. Alarm: Low Voltage Alarm
7. Rotor Position Detecting Method: Hall sensor
8. Mobile phone App or computer software can communicate with the controller to modify parameter
9. Size: 275x121x62mm
10. Net Weight: 2.05 kgs
11. Waterproof Grade: IP65

RisunMotor programmable sine-wave motor controller works with high efficiency, less noise, and lower energy consumption, which makes your electric vehicles or electric motorcycles more comfortable and easier to control. Our designed friendly interface of the programmable motor controller makes you set the parameters, conduct the tests and obtain the diagnostic info easily and quickly.
1. FOC-180° sinusoidal drive controller applied to BLDCM or PMSM.
2. It takes only 2-3 minutes for the motor to be well matched on its best electronic angle at the first time.
3. The motor torque ripple will be reduced to the minimum, so as to ensure electric vehicle to run without any noise and vibration, smoothly, and comfortably.
4. The precise current ring can provide accurate torque input to meet the requirement of large torque output during vehicle starting and climbing.
5. The controller enjoys high efficiency due to space vector converter control algorithm which can effectively reduce the temperature rise of controller and extend battery life mileage
6. Built-in various protection: locked-rotor protection, over-current protection, overload protection, over-temperature protection, speed protection, over-voltage protection, under-voltage protection and so on, effectively ensuring the safety of electronic control system and vehicle.
7. System status and fault intelligent management system can effectively monitor the current system operating mode external input state, the case of system failure, and the LED flashes at the same time to facilitate the diagnosis and maintenance.
8. Multi peripheral interfaces: reverse, cruise, anti-theft electronic brake, etc.
9. Parameter modifications and settings are available through Mobile phone via Bluetooth or computer via USB data cable
10. CAN BUS is optional to communicate with body instrument and BMS

RM-D700c Hydraulic Disc Brake (Can Cut Off Power) For Electric bike Controller
24/36/48V/60V/72 Universal Voltage
Model: RM-D700c
Front Brake Oil Tube Length: 100cmRear Brake Oil Tube Length : 162.5cm
Length of cable 165cm, for bulk order we can customize the length of the cable for customers
Lead mode: Two-wire

Warranty:
One year quality warranty (warranty is invalid for natural wearing or any damage due to wrong operation), we will exchange defective parts

Return Policy:
We do our best to serve our customers. We will refund you if you return the items within 30 days of your receipt of the items and it is only the reason of product itself like wrong product, defect, damage, anything that is seller's fault, not the buyer's personal preference or failure to use. Besides, the items returned must be in their original conditions.

Feedback:
You satisfaction and positive feedback is very important to us. Please kindly leave positive feedback and 5 stars if you are satisfied with our items and services. We hope to be friends with every customer and share photos, video and experiences together.If you have any problems with our items or services, please feel free to contact us before you leave negative feedback. Otherwise we will don't give any warranty.